ENGINE MONITORING MADE EASY
Installing a MADMAN early warning system to your vehicle or equipment could save you thousands in repair costs.
Land Rover 300 Tdi for EMS3
$1,180.00 NZD
Skip to product information
Land Rover 300 Tdi for EMS3
$1,180.00 NZD
This kit includes the EMS3 Display unit. The kit provides all the components required to measure the following parameters:
The unit provides 2 outputs that can be optionally connected to an external relay driver to control a dual battery switch, cooling fan, water/meth spray or an external alarm/light. Madman has a new triple relay module available exactly for this purpose.
- EGT (Exhaust Gas temperature) on EGR Port on the engine.
- Engine Coolant Temperature is measured in the OEM sensor position. You will remove the OEM sensor and install the Madman temperature sensor
- Engine Coolant Level is measured with a 1/2 BSP Plastic plug on the thermostat housing.
- Engine Oil Pressure with a Tee assembly at the OEM switch.
- Transfer Box Oil Temperature at the OEM temperature port on the exhaust side of the transfer box
- Boost via a pneumatic Tee in the boost line leading to the injector pump
- Vehicle Battery Voltage
- Engine RPM from 'W' of Alternator. A new wire may need to be installed is some cases.
- Engine Running Hours within the unit
The unit provides 2 outputs that can be optionally connected to an external relay driver to control a dual battery switch, cooling fan, water/meth spray or an external alarm/light. Madman has a new triple relay module available exactly for this purpose.